{"product_id":"mishimoto-duracore-3in-45-degree-coupler","title":"Mishimoto MMDCC-30A4BK DuraCore 3.0in 45-Degree Silicone Intercooler Boot Black","description":"\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eUniversal fit - compatible with any custom intercooler piping, charge pipe, or intake system requiring a 3.0\" inside diameter 45-degree silicone boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment Notes\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eInside Diameter: 3.0 in. on both ends - verify your intercooler or charge pipe OD before ordering\u003c\/li\u003e \u003cli\u003eDesigned for intercooler piping, turbo charge pipe routing, and intake system connections in custom or modified builds\u003c\/li\u003e \u003cli\u003eHose clamps are not included - use appropriately sized T-bolt or worm-gear clamps for a secure, leak-free seal\u003c\/li\u003e \u003cli\u003eAvailable in black (BK), blue (BL), and red (RD) - this listing is for the black version\u003c\/li\u003e \u003cli\u003ePart of the full Mishimoto DuraCore™ boot lineup: available in straight, straight hump, transition, 45-degree, and 90-degree configurations in 3\" to 4\" sizing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eDuraCore™ synthetic inner layer delivers superior resistance to heat, pressure, fuel, and oil versus standard silicone\u003c\/li\u003e \u003cli\u003eFive-layer silicone construction with heat-resistant embedded fibers provides maximum structural integrity\u003c\/li\u003e \u003cli\u003eReinforcing rings at connection points lock the boot rigid under high boost pressure to prevent blowouts\u003c\/li\u003e \u003cli\u003e45-degree geometry allows clean charge pipe routing in tight or angled engine bay layouts\u003c\/li\u003e \u003cli\u003eEngineered specifically for intercooler builds - resists oil and fuel exposure from boosted diesel and gas applications\u003c\/li\u003e \u003cli\u003eBlack finish for a clean, professional underhood appearance\u003c\/li\u003e \u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e \u003cli\u003ePart Number: MMDCC-30A4BK\u003c\/li\u003e \u003cli\u003eInside Diameter: 3.0 in. (76.2mm)\u003c\/li\u003e \u003cli\u003eBend Angle: 45 Degrees\u003c\/li\u003e \u003cli\u003eConstruction: 5-layer silicone with heat-resistant embedded fiber reinforcement\u003c\/li\u003e \u003cli\u003eInner Layer: DuraCore™ synthetic material (superior heat, pressure, fuel, and oil resistance)\u003c\/li\u003e \u003cli\u003eReinforcing Rings: Yes - at connection points for blowout resistance\u003c\/li\u003e \u003cli\u003eColor: Black\u003c\/li\u003e \u003cli\u003eApplication: Intercooler piping, charge pipe, intake systems\u003c\/li\u003e \u003cli\u003eClamps Included: No\u003c\/li\u003e \u003cli\u003eWarranty: Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIncluded Components\u003c\/h4\u003e\u003cul\u003e \u003cli\u003e1x DuraCore™ Silicone Intercooler Boot (3.0 in., 45-Degree, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Description\u003c\/h4\u003e\u003cp\u003eThe Mishimoto MMDCC-30A4BK is a 3.0-inch 45-degree DuraCore™ silicone intercooler boot engineered for custom charge pipe and intercooler piping builds where a clean angled connection is required. Unlike standard silicone boots, DuraCore™ technology lines the innermost layer with a synthetic material specifically formulated to resist heat, pressure, fuel, and oil - the exact conditions present in boosted diesel and gas applications where standard silicone is prone to early failure.\u003c\/p\u003e\u003cp\u003eFive layers of silicone reinforced with heat-resistant embedded fibers and reinforcing rings at the clamp points give this boot the structural rigidity to hold under sustained high boost without ballooning or blowing out. The 45-degree geometry suits routing in confined engine bays where straight boots won't clear surrounding components. Clamps are sold separately - T-bolt clamps are recommended for maximum clamping force on high-boost builds. Backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53483636326719,"sku":"MISMMDCC-30A4BK","price":77.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/7308\/9343\/files\/78c591822af1408530acddcb449ad067L.jpg?v=1780205219","url":"https:\/\/wcaperformance.com\/products\/mishimoto-duracore-3in-45-degree-coupler","provider":"WCA Performance","version":"1.0","type":"link"}