{"product_id":"mishimoto-duracore-3-5in-straight-coupler","title":"Mishimoto MMDCC-35SBK DuraCore 3.5in Straight Silicone Intercooler Boot Black","description":"\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eUniversal fit - compatible with any custom intercooler piping, charge pipe, or turbo system requiring a 3.5\" inside diameter straight silicone boot\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment Notes\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eInside Diameter: 3.5 in. (88.9mm) on both ends - verify your intercooler or charge pipe OD before ordering\u003c\/li\u003e \u003cli\u003eStraight profile - connects two pipes of the same diameter in-line with no change in direction or size\u003c\/li\u003e \u003cli\u003eDesigned for intercooler piping, charge pipe, and turbo inlet\/outlet connections in custom builds\u003c\/li\u003e \u003cli\u003eHose clamps are not included - use appropriately sized T-bolt or worm-gear clamps on each end\u003c\/li\u003e \u003cli\u003eAvailable in black (BK), blue (BL), and red (RD) - this listing is for the black version\u003c\/li\u003e \u003cli\u003ePart of the full Mishimoto DuraCore™ boot lineup: available in straight, straight hump, transition, 45-degree, and 90-degree configurations in 3\" to 4\" sizing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eDuraCore™ synthetic inner layer provides superior resistance to heat, pressure, fuel, and oil versus standard silicone\u003c\/li\u003e \u003cli\u003eFive-layer silicone construction with heat-resistant embedded fibers delivers maximum structural integrity\u003c\/li\u003e \u003cli\u003eStraight geometry provides a clean, direct connection between two 3.5\" pipes in-line\u003c\/li\u003e \u003cli\u003eReinforcing rings at connection points lock the boot rigid under high boost to prevent blowouts\u003c\/li\u003e \u003cli\u003eEngineered for intercooler and charge pipe builds - withstands oil and fuel exposure in high-boost diesel and gas applications\u003c\/li\u003e \u003cli\u003eBlack finish provides a clean, professional underhood appearance\u003c\/li\u003e \u003cli\u003eBacked by the Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e \u003cli\u003ePart Number: MMDCC-35SBK\u003c\/li\u003e \u003cli\u003eInside Diameter: 3.5 in. (88.9mm) - both ends\u003c\/li\u003e \u003cli\u003eStyle: Straight\u003c\/li\u003e \u003cli\u003eConstruction: 5-layer silicone with heat-resistant embedded fiber reinforcement\u003c\/li\u003e \u003cli\u003eInner Layer: DuraCore™ synthetic material (superior heat, pressure, fuel, and oil resistance)\u003c\/li\u003e \u003cli\u003eReinforcing Rings: Yes - at connection points for blowout resistance\u003c\/li\u003e \u003cli\u003eColor: Black\u003c\/li\u003e \u003cli\u003eApplication: Intercooler piping, charge pipe, turbo inlet\/outlet connections\u003c\/li\u003e \u003cli\u003eClamps Included: No\u003c\/li\u003e \u003cli\u003eWarranty: Mishimoto Lifetime Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIncluded Components\u003c\/h4\u003e\u003cul\u003e \u003cli\u003e1x DuraCore™ Silicone Intercooler Boot (3.5 in., Straight, Black)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Description\u003c\/h4\u003e\u003cp\u003eThe Mishimoto MMDCC-35SBK is a 3.5-inch straight DuraCore™ silicone intercooler boot designed for custom charge pipe and intercooler builds where two 3.5\" pipes need a direct, in-line silicone connection. The straight profile makes it the go-to choice for bridging pipe joints, connecting an intercooler to a charge pipe, or anywhere in a piping layout where no change in direction or diameter is required.\u003c\/p\u003e\u003cp\u003eDuraCore™ technology lines the innermost layer with a synthetic material that resists heat, pressure, fuel, and oil better than standard silicone - the conditions present in high-boost diesel and gas applications where inferior boots crack, swell, and fail. Five silicone layers reinforced with heat-resistant embedded fibers and reinforcing rings at each clamping zone provide the structural rigidity to hold under sustained boost without ballooning or blowing out. Clamps are sold separately - T-bolt clamps are recommended for high-boost builds. Backed by the Mishimoto Lifetime Warranty.\u003c\/p\u003e","brand":"Mishimoto","offers":[{"title":"Default Title","offer_id":53483636851007,"sku":"MISMMDCC-35SBK","price":69.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/7308\/9343\/files\/410f5a65403f734aa864ec875b445607L.jpg?v=1780205224","url":"https:\/\/wcaperformance.com\/products\/mishimoto-duracore-3-5in-straight-coupler","provider":"WCA Performance","version":"1.0","type":"link"}