{"product_id":"k-n-2016-2020-ford-f-150-v8-5-0l-nextgen-aluminum-cold-air-intake","title":"K\u0026N 70-2591 NextGen Aluminum Cold Air Intake for 2016-2020 Ford F-150 V8 5.0L","description":"\u003ch4\u003eVehicle Fitment\u003c\/h4\u003e\u003cul\u003e \u003cli\u003e2016-2020 Ford F-150 - All Trims (5.0L V8, 2WD and 4WD)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFitment Notes\u003c\/h4\u003e\u003cul\u003e \u003cli\u003e5.0L V8 engine only - does not fit F-150 models equipped with the 2.7L EcoBoost V6, 3.3L V6, 3.5L EcoBoost V6, or 5.0L High Output Raptor engine\u003c\/li\u003e \u003cli\u003eFits all cab configurations (Regular, SuperCab, SuperCrew) and all bed lengths with the 5.0L V8\u003c\/li\u003e \u003cli\u003eIntake tube accommodates the factory EVAP vent and crankcase vent hoses - no tune required\u003c\/li\u003e \u003cli\u003eNot CARB certified - not legal for sale or use in California or states adopting California emissions standards\u003c\/li\u003e \u003cli\u003eProudly engineered and manufactured in the USA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eFeatures\u003c\/h4\u003e\u003cul\u003e \u003cli\u003eUp to +14.6 HP and +16.5 lb-ft of torque over the factory intake with no ECU tune required\u003c\/li\u003e \u003cli\u003eAmerican 6063 aluminum rigid tube increases airflow volume up to 67% over the restrictive factory airbox assembly\u003c\/li\u003e \u003cli\u003eCustom NextGen enclosed airbox design isolates intake air from engine bay heat for consistent cool-air performance\u003c\/li\u003e \u003cli\u003eOversized conical oiled cotton gauze filter delivers exceptional airflow and filtration efficiency\u003c\/li\u003e \u003cli\u003eFilter serviceable up to 100,000 miles under normal highway driving conditions - washable and reusable for the life of the vehicle\u003c\/li\u003e \u003cli\u003eInstalls in 60 minutes or less using factory mounting points with basic hand tools - no cutting or drilling required\u003c\/li\u003e \u003cli\u003eWill not void the factory Ford vehicle warranty\u003c\/li\u003e \u003cli\u003eBacked by K\u0026amp;N's No-Hassle Lifetime Limited Warranty\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eSpecifications\u003c\/h4\u003e\u003cul\u003e \u003cli\u003ePart Number: 70-2591\u003c\/li\u003e \u003cli\u003eSeries: K\u0026amp;N NextGen Aluminum\u003c\/li\u003e \u003cli\u003eEstimated Horsepower Gain: Up to +14.6 HP\u003c\/li\u003e \u003cli\u003eEstimated Torque Gain: Up to +16.5 lb-ft\u003c\/li\u003e \u003cli\u003eAirflow Increase: Up to 67% over factory\u003c\/li\u003e \u003cli\u003eIntake Tube Material: American 6063 Aluminum (rigid)\u003c\/li\u003e \u003cli\u003eAir Filter Style: Oversized Conical\u003c\/li\u003e \u003cli\u003eAir Filter Material: Oiled Cotton Gauze\u003c\/li\u003e \u003cli\u003eAirbox Style: Custom NextGen Enclosed\u003c\/li\u003e \u003cli\u003eEVAP Vent Port: Yes\u003c\/li\u003e \u003cli\u003eCrankcase Vent Hose Port: Yes\u003c\/li\u003e \u003cli\u003eTune Required: No\u003c\/li\u003e \u003cli\u003eFilter Service Interval: Up to 100,000 miles\u003c\/li\u003e \u003cli\u003eCARB Certified: No - Not legal in California or CARB states\u003c\/li\u003e \u003cli\u003eWarranty: No-Hassle Lifetime Limited\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eIncluded Components\u003c\/h4\u003e\u003cul\u003e \u003cli\u003e1x 6063 aluminum rigid intake tube\u003c\/li\u003e \u003cli\u003e1x Oversized conical K\u0026amp;N high-flow air filter (oiled cotton gauze, pre-oiled)\u003c\/li\u003e \u003cli\u003e1x Custom NextGen enclosed airbox\u003c\/li\u003e \u003cli\u003e1x Full mounting hardware and literature packet\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Description\u003c\/h4\u003e\u003cp\u003e The K\u0026amp;N 70-2591 is a NextGen Aluminum cold air intake system engineered for the 2016-2020 Ford F-150 equipped with the 5.0L V8 engine across all trims and cab configurations in both 2WD and 4WD. Part of K\u0026amp;N's newly released 70-series NextGen Aluminum lineup, this intake uses a rigid 6063 American aluminum tube to deliver up to 67% more airflow than the factory intake assembly - producing gains of up to +14.6 HP and +16.5 lb-ft of torque with no ECU tune required. The custom NextGen enclosed airbox design shields the filter and incoming air from engine bay heat, ensuring a consistent supply of cool, dense air to the 5.0L V8 during daily driving, towing, and hauling.\u003c\/p\u003e\u003cp\u003e Installation uses the factory mounting points and can be completed in 60 minutes or less with standard hand tools, with no cutting, drilling, or modifications required. The intake tube retains all factory EVAP and crankcase vent hose connections, maintaining full OBD2 compatibility on a stock tune. The pre-oiled cotton gauze filter requires service only every 100,000 miles. Proudly designed and manufactured in the USA, the 70-2591 is backed by K\u0026amp;N's No-Hassle Lifetime Limited Warranty and will not void the factory Ford vehicle warranty.\u003c\/p\u003e","brand":"K\u0026N Engineering","offers":[{"title":"Default Title","offer_id":53362927042879,"sku":"KNN70-2591","price":549.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0832\/7308\/9343\/files\/c99cfe6be21ebc946f7d970cf6dd0896L.jpg?v=1780090117","url":"https:\/\/wcaperformance.com\/products\/k-n-2016-2020-ford-f-150-v8-5-0l-nextgen-aluminum-cold-air-intake","provider":"WCA Performance","version":"1.0","type":"link"}